A 1 mL and a 1.8 mL exosome vial side by side under a simple chart comparing total count per vial with concentration per mL

Total EV Count vs. Concentration per mL: How to Compare Exosome Product Specs Across Suppliers

Stem Nova Network
Product Evaluation · Specs & Documentation · For Licensed Professionals

By Stem Nova Network | November 2026 | 7 min read | For licensed medical professionals only

To compare exosome products fairly, put every product on the same three numbers: total extracellular vesicle (EV) count per vial, fill volume, and concentration per milliliter (total count ÷ volume). A headline like "150 billion" describes the whole vial, not its concentration, so two products with very different labels can be close per mL, and two products with similar labels can be far apart. Then check that each figure is NTA-measured, lot-specific and confirmed on the Certificate of Analysis.

Supplier labels are not written in a common format. Some lead with total count, some with concentration, some with a figure that has no volume next to it at all. This guide shows how to normalize the numbers, the unit traps to watch for, and how to read Stem Nova Network's own product specs the same way.

Comparing products side by side? Every Stem Nova Network exosome lot is NTA-verified with lot-specific, dual-lab COA documentation available in the wholesale portal. Apply for wholesale access or talk to our team.

The Three Numbers That Make Products Comparable

1

Total EV count per vial

The number of particles in the entire vial, as measured by Nanoparticle Tracking Analysis (NTA). This is usually the headline figure, such as "77 billion."

2

Fill volume

How much liquid is in the vial, in milliliters. Without it, a total count cannot be compared with anything.

3

Concentration per mL

Total count divided by fill volume, usually written in particles per mL (P/mL). This is what NTA reports directly on most COAs.

Once all three are written down for each product, the comparison becomes simple arithmetic instead of a contest of labels.

A Worked Example

Here is how the same method looks with two hypothetical products:

Product Label Fill volume Concentration per mL
Product A "100 billion exosomes" 5 mL 2.0 × 10¹⁰ P/mL (20 billion/mL)
Product B "60 billion exosomes" 1 mL 6.0 × 10¹⁰ P/mL (60 billion/mL)

Product A has the larger headline number. Product B is three times as concentrated. Neither fact alone tells you which product suits a given clinician-directed protocol, but you can only make that decision once both are on the same scale.

Reading Stem Nova Network's Specs the Same Way

The same arithmetic applies to our own products. Both are topical cosmetic exosome biologics derived from 3D bioreactor-cultured Wharton's jelly UCT-MSCs.

Product Total EVs per vial Fill volume Concentration per mL
3DExo+™ 77B Exosome Matrix 77 billion 1 mL ≈ 7.7 × 10¹⁰ P/mL
Dermal Papillary Secretome Matrix+ 150B 150 billion 1.8 mL ≈ 8.3 × 10¹⁰ P/mL

The 150B vial holds roughly twice the total EVs of the 77B, in 1.8 times the volume, so the concentration per mL of the two is similar. The main difference is how much is in the vial, not how concentrated it is. That is exactly the kind of point a headline number hides, and why the three-number method matters even within one supplier's catalog.

These are labeled figures. The lot-specific NTA result on each COA is the measured value for the vials you actually receive.

Unit Traps to Watch For

Scientific notation

1 × 10⁹ is one billion. 1 × 10¹⁰ is ten billion. A COA reading of "6.0 × 10¹⁰ P/mL" is 60 billion per mL, not 6 billion. Misreading the exponent by one is the most common comparison error.

"Particles" vs. "exosomes"

NTA counts all particles in its size range. Labels may say particles, EVs or exosomes for the same measurement. Compare like with like, and see What Is NTA Verification for what an NTA count does and does not include.

Lyophilized products and reconstitution

For freeze-dried products, the per-vial count is fixed, but the per-mL concentration depends on how much diluent is used to reconstitute it. Compare lyophilized products on total count per vial and check the reconstitution volume stated on the label. More on the format difference: Lyophilized vs. Liquid Exosomes.

Counts with no method

A number with no measurement method behind it, or one described as "estimated" or "up to," is not comparable to an NTA-measured, lot-specific value.

A spec sheet describes the vial, not an outcome. Total count, volume and concentration tell you what is in the product and let you compare suppliers accurately. They do not predict how a product will perform, and a higher number is not, on its own, a reason to choose one product over another. Product selection remains clinician-directed.

Label Figure vs. COA Figure

The label states the nominal amount. The COA reports what was measured for that lot. When comparing suppliers, check both:

  • Is the COA concentration in P/mL, and does it multiply out to the label's total for the stated fill volume?
  • Is the NTA instrument named (for example, NanoSight)?
  • Is the result lot-specific, not a generic range?
  • Is the size distribution reported (mean or mode in nm)?
  • Is the count confirmed by an independent laboratory?

For how particle and cell counts are measured and documented in more depth, see How Many Exosomes or Stem Cells Are in a Vial?

A Note on hUCT-MSC Specs

The same normalization applies to cell products, with cells instead of particles. Stem Nova Network's 25M hUCT-MSC vial contains 25 million cells in 1.8 mL, and the 10M vial contains 10 million cells in 1 mL. Post-thaw viability, measured by trypan blue, varies by lot and typically falls between 95% and 98%; each lot’s result is reported on its COA. When comparing cell products across suppliers, ask whether the label figure is total cells or viable cells, and how and when viability was measured. hUCT-MSC products are individualized and not FDA-approved.

A Comparison Worksheet

Use one row per product when evaluating suppliers:

Field What to record
Total count per vial From the label, with units
Fill volume mL, or reconstitution volume for lyophilized products
Concentration P/mL from the COA, and your own calculation from the label
Method NTA instrument named? Lot-specific?
Size distribution Mean or mode in nm
Format and storage Liquid frozen (−80 °C) or lyophilized
Contamination testing Sterility, endotoxin, mycoplasma on the same COA
Independent confirmation Single-lab or dual-lab
The bottom line: Never compare exosome products on the headline number alone. Write down total count, fill volume and concentration per mL for each product, confirm them against the lot-specific COA, and watch the exponent when reading scientific notation.

Stem Nova Network exosome biologics are manufactured in the USA in an FDA-registered facility under cGTP-compliant standards (21 CFR Part 1271), NTA-verified, and documented on lot-specific dual-lab COAs. See Topical Exosome Biologics for full product specifications.

Compare Our Specs Against Any Supplier

Licensed practices can view pricing, lot-specific COAs, and NTA reports after credential verification. Most applications are reviewed within 24 hours.

Apply for Wholesale Access → Contact Our Team

Frequently Asked Questions

How do you compare exosome products from different suppliers?

Record three numbers for each product: total EV count per vial, fill volume, and concentration per mL (total count divided by volume). Then confirm each figure against the lot-specific Certificate of Analysis, checking that the count was measured by NTA on a named instrument.

What is the difference between total exosome count and concentration?

Total count is the number of particles in the whole vial. Concentration is the number per milliliter. A larger vial can have a higher total count but a lower concentration, so the two need to be read together with the fill volume.

What does 10¹⁰ P/mL mean on an exosome COA?

P/mL means particles per milliliter. 1 × 10¹⁰ is ten billion, so a result of 6.0 × 10¹⁰ P/mL means 60 billion particles per milliliter. 1 × 10⁹ is one billion.

How do the 77B and 150B compare?

The 3DExo+™ 77B contains 77 billion EVs in 1 mL (about 7.7 × 10¹⁰ per mL). The Dermal Papillary Secretome Matrix+ 150B contains 150 billion EVs in 1.8 mL (about 8.3 × 10¹⁰ per mL). The 150B holds roughly twice the total EVs, while the concentration per mL of the two is similar. Both are topical cosmetic products.

How should lyophilized exosome products be compared?

Compare them on total count per vial, because the per-mL concentration depends on how much diluent is used for reconstitution. Check the reconstitution volume stated on the label before converting to a per-mL figure.

Does a higher exosome count mean a better product?

Not on its own. Count, volume and concentration describe what is in the vial and make suppliers comparable, but they do not predict performance. Documentation quality, measurement method, contamination testing and lot consistency matter as much as the number, and product selection remains clinician-directed.

Regulatory Notice: This article is for informational purposes only and is intended for licensed medical professionals. It describes product specifications and documentation and does not provide preparation, dosing, procedural, or treatment guidance. Stem Nova Network exosome products are supplied to licensed professionals for topical cosmetic use only and are not for injection. hUCT-MSC products are individualized, not FDA-approved, and clinician-directed; patients should consult their primary care provider. These products are not FDA-approved drugs or therapeutic agents and are not intended to diagnose, treat, cure, or prevent any disease or condition. Stem Nova Network is a DBA of D1D Enterprises, Inc.